8level

Polish (Poland)English (United Kingdom)
Nano-Karta-150n

Categories

SieciSieci bezprzewodoweOdtwarzacze multimedialneBramki/routery VoIPUrządzenia NAS
PDFPrint

Wireless Broadband Router ADSL2+ 150Mbps 8level AWRT-150

Wireless networks arrow Wireless Broadband Router ADSL2+ 150Mbps 8level AWRT-150

Wireless Broadband Router ADSL2+ 150Mbps 8level AWRT-150

8level AWRT-150 is a combined wired/wireless network connection device with integrated internet-sharing ADSL2+ router with NAPT translation, firewall and 4-port switch. Designed to provide fast and effective sharing internet connection

The device complies with 802.11n/b/g and ADSL2+ standards (Draft 2.0) and works in 1T1R mode which provides speed up to 150Mbps and makes it ideal for video streaming, online gaming and internet calls.

AWRT-150 is compatible with WI-FI Protected Setup™ (WPS) and provides WPA/WPA2(AES) encryptions for fast and secure setup and data sharing.

Configuration panel is available through built-in website which is available in English and Polish languages.

Ikona_lite_N

 

Ikona_WPS




FEATURES:
¦  Wireless Lite N speed up to 150Mbps make it ideal for on-line gaming or Internet browsing
¦ Provides a performance solution for sharing a broadband Internet connection over secure wireless network
¦ Supports the latest security features to prevent unauthorized access
¦ WPS button securely connects devices in a snap
¦ ADSL port speed up to 24Mbps
¦  Advanced controls to supervise Internet activity
¦ Backward compatible with 802.11b/g products
¦ Ease to configure and provides monitoring information


Specifications
Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Interfejs: 1 WAN port (RJ-11)
4 LAN ports 10/100Mbps
Buttons: WPS
Reset
Power supply: Input: 100-240V - 0.4A 50/60HZ
Output: 5VDC / 2000mA
Antenna:

1*5dBi integrated omni-directional antenna

Wireless Functions
Frequency: 2.4-2.4835GHz
Signal Rate: 802.11n (lite N): up to150Mbps
802.11g: up to 54Mbps
802.11b: up to 11Mbps
RF Power: 20dBm (max EIRP)
Receive Sensitivity: 130M: -68dBm@10%
108M: -68dBm@10%
54M: -68dBm@10%
11M: -85dBm@8%
6M: -88dBm@10%
1M: -90dBm@8%
Operating Mode: AP
Encryption: 64/128-bit WEP / WPA / WPA2 / WPA-PSK / WPA2-PSK

Software Functions

WAN: Dynamic IP / Static IP / PPPoE / PPPoA / 1483 Bridged / 1483 MER
DHCP: Server, Client, DHCP Client List, Address reservations
Port Forwarding: Virtual Server, Port Triggering, UPnP, DMZ
Dynamic DNS: DynDns
VPN Pass-Throught: PPTP, L2TP, IPSec, IGMP Snooping
Access Control: Parental control, local management, the list of that host, schedule access, policy management (rules)
Management: Access control
Local management
Remote management
Others
Certification: CE, FCC, RoHS
Package Contents: Wireless Broadband ADSL2+ Router 150Mbps AWRT-150
Power Adapter
RJ-45 Ethernet cable
2 x RJ-11 Telephone cable
Spliter
Quick installation guide
Setup CD-ROM
System Requirements: Windows 2000/XP/Vista/7
Operating Temperature: 0°C–40°C (32°F–104°F)
Operating Humidity: 10%–90%
FAQ - information about how to solve problems that may occur while using the device.


  • 1. I cannot access the Web-based Configuration Utility from the Ethernet computer used to configure the router:
  • ¦ Check that the LAN LED is on. If the LED is not on, verify that the cable for the LAN connection is firmly connected.
  • ¦ Check whether the computer resides on the same subnet with the router’s LAN IP address.
  • ¦ If the computer acts as a DHCP client, check whether the computer has been assigned an IP address from the DHCP server. If not, you will need to renew the IP address.
  • ¦ Use the ping command to ping the router’s LAN IP address to verify the connection.
  • ¦ Make sure your browser is not configured to use a proxy server.
  • ¦ Check that the IP address you entered is correct. If the router’s LAN IP address has been changed, you should enter the reassigned IP address instead.


  • 2. I forgot Password (Reset the Router without Login):
  • ¦ Use a pencil to press the button for about 2-6 seconds when it is working, then leave your hands, it will restore settings to the factory configuration. The default password is admin.


  • 3. I have some problems related to Connection with Cable Modem:
  • ¦ Check whether the ADSL modem works well or the signal is stable. There is ADSL indicator light on the router, users can check whether the signal is ok or the modem works well from those lights. If not, please contact the ISP.
  • ¦ Check the front panel of the Router, there are also some indicator lights there. When the physical connection is correct, the Power light and the CPU light should be solid; the ADSL light should be stable. If you use your computer, the corresponding LAN port light should be blinking too. If not, please check whether the cables work or not.
  • ¦ Repeat the steps in ADSL Setup connection.


  • 4. I can browse the router’s Web-based Configuration Utility but cannot access the Internet:
  • ¦ Check if the ADSL LED is ON. If not, verify that the physical connection between the router and the socket in your wall. Also ensure the router is working properly.
  • ¦ If ADSL LED is ON, open the System Overview page of the Web configuration utility and check the status group to see if the router’ s ADSL port has successfully obtained an IP address.
  • ¦ Make sure you are using the correction method (Dynamic IP Address, PPPoE, or Static IP) as required by the ISP. Also ensure you have entered the correct settings provided by the ISP.


  • 5. My wireless client cannot communicate with another Ethernet computer:
  • ¦ Ensure the wireless adapter functions properly. You may open the Device Manager in Windows to see if the adapter is properly installed.
  • ¦ Make sure the wireless client uses the same SSID and security settings (if enabled) as the 150Mbps Wireless Broadband Router.
  • ¦ Ensure that the wireless adapter’s TCP/IP settings are correct as required by your network administrator.
  • ¦ If you are using a 802.11b wireless adapter, and check that the 802.11G Mode item in Wireless Basic Setting page, is not configured to use 802.11G Performance.
  • ¦ Use the ping command to verify that the wireless client is able to communicate with the router’s LAN port and with the remote computer. If the wireless client can successfully ping the router’ s LAN port but fails to ping the remote computer, then verify the TCP/IP settings of the remote computer.