8level

Polish (Poland)English (United Kingdom)
Nano-Karta-150n

Categories

SieciSieci bezprzewodoweOdtwarzacze multimedialneBramki/routery VoIPUrządzenia NAS
PDFPrint

Wireless Broadband Router 300Mbps WRT-300 SMART

Wireless networks arrow Wireless Broadband Router 300Mbps WRT-300 SMART

Wireless Broadband Router 300Mbps WRT-300 SMART

8level WRT-300 SMART is a combined wired/wireless network connection device with integrated internet-sharing router with NAPT translation, firewall and 4-port switch. Designed to provide fast and effective sharing internet connection.

The device complies with 802.11n/b/g standards (Draft 2.0) and works in 2T2R mode which provides speed up to 300Mbps and makes it ideal for video streaming, online gaming and internet calls.

WRT-300 SMART is compatible with WI-FI Protected Setup™ (WPS) and provides WPA/WPA2(AES) encryptions for fast and secure setup and data sharing.

The device offers QoS function, allowing optimal bandwidth utilization and offers bandwidth control to enhance the quality of VoIP services or preventing non-critical applications from degrading network performance. Another important advantage of WRT-300 SMART is VLAN support, which allows using it in IPTV networks.



FEATURES:
¦  Wireless N speed up to 300Mbps make it ideal for on-line gaming or Internet browsing
¦ Provides a performance solution for sharing a broadband Internet connection over secure wireless network
¦ Supports the latest security features to prevent unauthorized access
¦ QoS function for effective multimedia bandwidth allocation
¦ WPS button securely connects devices in a snap
¦ Support multiple wireless modes: Router, AP, Client AP, Repeater, WISP
¦ Backward compatible with 802.11b/g products
¦ Ease to configure and provides monitoring information


Specifications
Standards: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
Interfejs: 1 WAN port 10/100Mbps
4 LAN ports 10/100Mbps
Buttons: WPS
Reset
Power supply: Input: 100-240V - 0.2A 50/60HZ
Output: 5VDC / 1000mA
Antenna:

2*5dBi integrated omni-directional antenna

Wireless Functions
Frequency: 2.4-2.4835GHz
Signal Rate: 802.11n: up to 300Mbps
802.11g: up to 54Mbps
802.11b: up to 11Mbps
RF Power: 17dBm (max EIRP)
Receive Sensitivity: 11n : -70dBm@10% PER
11g : -70dBm@10% PER
11b: -85dBm@8% PER
Operating Mode: Router, AP, Client AP, Repeater, WISP
Encryption: 64/128-bit WEP / WPA / WPA2 / WPA-PSK / WPA2-PSK

Software Functions

WAN: Dynamiczne IP / Statyczne IP / PPPoE
DHCP: Server, Client, DHCP Client List, Address reservations
Port Forwarding: Virtual Server, UPnP, DMZ
QoS: Bandwidth control / allocation of bandwidth
Dynamic DNS: DynDns
VPN Pass-Throught: PPTP, L2TP, IPSec
Access Control: Parental control, local management, schedule access, policy management (rules)
Firewall: DoS, SPI Firewall
Management: Access control
Local management
Remote management
Others
Certification: CE, FCC, RoHS
Package Contents: Wireless Broadband Router 300Mbps WRT-300
Power Adapter
RJ-45 Ethernet cable
Quick installation guide
Setup CD-ROM
System Requirements: Windows 2000/XP/Vista/7/8/8.1
Operating Temperature: 0°C–40°C (32°F–104°F)
Operating Humidity: 10%–90%
FAQ - information about how to solve problems that may occur while using the device.


  • 1. I cannot access the Web-based Configuration Utility from the Ethernet computer used to configure the router:
  • ¦ Check that the LAN LED is on. If the LED is not on, verify that the cable for the LAN connection is firmly connected.
  • ¦ Check whether the computer resides on the same subnet with the router’s LAN IP address.
  • ¦ If the computer acts as a DHCP client, check whether the computer has been assigned an IP address from the DHCP server. If not, you will need to renew the IP address.
  • ¦ Use the ping command to ping the router’s LAN IP address to verify the connection.
  • ¦ Make sure your browser is not configured to use a proxy server.
  • ¦ Check that the IP address you entered is correct. If the router’s LAN IP address has been changed, you should enter the reassigned IP address instead.


  • 2. I forgot Password (Reset the Router without Login):
  • ¦ Use a pencil to press the button for about 2-6 seconds when it is working, then leave your hands, it will restore settings to the factory configuration. The default password is admin.


  • 3. I have some problems related to Connection with Cable Modem:
  • ¦ Check whether the DSL modem works well or the signal is stable. Normally there will be some indicator lights on the modem, users can check whether the signal is ok or the modem works well from those lights. If not, please contact the ISP.
  • ¦ Check the front panel of the Router, there are also some indicator lights there. When the physical connection is correct, the Power light and the CPU light should be solid; the WAN light should be blinking. If you use your computer, the corresponding LAN port light should be blinking too. If not, please check whether the cables work or not.
  • ¦ Repeat the steps in WAN Setup Connect with Internet through DSL Modem.


  • 4. I can browse the router’s Web-based Configuration Utility but cannot access the Internet:
  • ¦ Check if the WAN LED is ON. If not, verify that the physical connection between the router and the DSL/Cable modem is firmly connected. Also ensure the DSL/Cable modem is working properly.
  • ¦ If WAN LED is ON, open the System Overview page of the Web configuration utility and check the status group to see if the router’ s WAN port has successfully obtained an IP address.
  • ¦ Make sure you are using the correction method (Dynamic IP Address, PPPoE, or Static IP) as required by the ISP. Also ensure you have entered the correct settings provided by the ISP.
  • ¦ For cable users, if your ISP requires a registered Ethernet card MAC address, make sure you have cloned the network adapter’ s MAC address to the WAN port of the router. (See the MAC Address field in WAN Setup).


  • 5. My wireless client cannot communicate with another Ethernet computer:
  • ¦ Ensure the wireless adapter functions properly. You may open the Device Manager in Windows to see if the adapter is properly installed.
  • ¦ Make sure the wireless client uses the same SSID and security settings (if enabled) as the 150Mbps Wireless Broadband Router.
  • ¦ Ensure that the wireless adapter’s TCP/IP settings are correct as required by your network administrator.
  • ¦ If you are using a 802.11b wireless adapter, and check that the 802.11G Mode item in Wireless Basic Setting page, is not configured to use 802.11G Performance.
  • ¦ Use the ping command to verify that the wireless client is able to communicate with the router’s LAN port and with the remote computer. If the wireless client can successfully ping the router’ s LAN port but fails to ping the remote computer, then verify the TCP/IP settings of the remote computer.



You may also be interested in this/these product(s)